Panasonic Viera TX-26LX600F Operating Instructions Manual

Also see for Viera TX-26LX600F: Service manual Service manual

Contents

Panasonic Viera TX-26LX600F Operating Instructions Manual Manual pdf 14 page image

AdvancedControl with HDMISetup menuAV2Q-LinkTOPOnAV2 out TVTuning menuOSD languageTeletextText language WestOff timer OffMain menuPicture menuSound menuSetup menuHome theatre26 27Select "On" (default is On)Main menuPicture menuSound menuSetup menuHome theatreQ-Link interlocks the TV and VCR / DVD recorder, enables easy recording and playback.■ Condition■ Features availableWhat yousee isWhat yourecordInformation/ MessagePoweron linkand EasyplaybackPower offlinkRecording information or if recording is not possible, a message is displayed.(Only when the programme number is "0" or "AV mode" for some equipment.)Insert a videocassette or DVD in the recording equipment and it is operated, TVis turned on and input mode is switched automatically so that you can view thecontent. (Only when TV is in Standby mode.)When TV is set to Standby mode, the recording equipment is also automaticallyset to Standby. (Only when the videocassette or DVD is not active.)• Use the VCR / DVD recorder with the following logos:"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"• Connect the equipment to this TV’s AV2 or AV3 terminal via a "fully-wired" SCART cable. (p. 28)• Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). (p. 16)Q-LinkDirect TV Recording:Recording the current programme in VCR / DVD recorder immediately.• When Direct TV Recording is performed, therecording equipment is automatically turned on ifit is in Standby mode.• The recording equipment is recording fromits own tuner. You can turn the TV off duringrecording.• Do not turn the TV off during recording AVsource. Otherwise the recording will be stopped.Select "Setup menu"Select "Control with HDMI"213Display the menu∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Playertheatre, Panasonic Amplifier, etc.) allow you to enjoy the easy playback or home theatre.About connections, see "Connections" (p. 29). Read the manuals of the equipment too.Non-HDMI-compliant cables cannot be utilized.About applicable equipments, consult your local Panasonic dealer.nextselectselectEasyplayback Automatic Input switching-When the connected Panasonic equipment is operated, inputmode is switched automatically. When it is stopped operating, input mode is returned.Power onlinkWhen the connected Panasonic equipment is operated, TV is also automaticallyturned on and the content is reproduced. (Only when TV is in Standby mode.)Power offlinkWhen TV is set to Standby mode, the connected Panasonic equipment is alsoautomatically set to Standby.selectTheatrespeakerYou can control the theatre speaker with TV’s remote control.This function is available when Panasonic Amplifier or Player theatre is connected.setDisplay the menuSelect "Home theatre" or "TV speaker"■ Home theatre:• When selecting "Home theatre", the sound of TV speakers is mute.• When the equipment is turned off, TV speakers will be active.Volume up / downMute■ TV speaker:Control with HDMI " ControlTM "∗Preparations(For the fi rst time / When adding new equipment, reconnecting equipment or changing setup)After connection turn the equipment on and then switch the TV on.Select the input mode to HDMI1 or HDMI2 (p. 12), and make sure that an image is displayedcorrectly.4select• "DATA LOGIC" (a trademark of Metz Corporation) • "Megalogic" (a trademark of Grundig Corporation)• "Easy Link" (a trademark of Philips Corporation) • "SMARTLINK" (a trademark of Sony Corporation)Read the manuals of the equipment too.Some recording equipments are not applicable. Read the manuals of the equipment.• External EquipmentAdjustment for equipment (automaticallyturned on if it is in Standby mode)TV speakers are active.■ Download channel settings• Perform Auto setup. (p. 20)When first using this TV, see "Auto Setup". (p. 9)• Perform download to the equipment. (p. 18)External Equipment