Panasonic Viera TX-26LX600F Operating Instructions Manual

Also see for Viera TX-26LX600F: Service manual Service manual

Contents

Panasonic Viera TX-26LX600F Operating Instructions Manual Manual pdf 20 page image

FAQs, etc.• Specifications• SD Card: On screen messagesTX-26LX600F TX-32LX600FPower Source AC 220-240 V, 50 / 60 HzPowerConsumptionAverage use 82 W 136 WStandby condition 0.4 WDisplaypanelAspect Ratio 16:9Visible screen size 66 cmV 80 cmV565 mm (W) × 318 mm (H) 697 mm (W) × 392 mm (H)Number of pixels 1,049,088 (1,366 (W) × 768 (H))SoundSpeaker Woofer (Φ80 mm) × 2 pcs, Tweeter (16 mm × 73 mm) × 4 pcsAudio Output 20 W (5 W + 5 W, 5 W + 5 W)Headphones M3 (3.5 mm) stereo mini Jack × 1PC signalsVGA, SVGA, XGASXGA ······ (compressed)Horizontal scanning frequency 31 - 69 kHzVertical scanning frequency 59 - 86 HzReceiving Systems /Band namePAL B, G, H, I, SECAM B, G, SECAM L / L’VHF E2 - E12 VHF H1 - H2 (ITALY)VHF A - H (ITALY) UHF E21 - E69CATV (S01 - S05) CATV S1 - S10 (M1 - M10)CATV S11 - S20 (U1 - U10) CATV S21 - S41 (Hyperband)PAL D, K, SECAM D, KVHF R1 - R2 VHF R3 - R5VHF R6 - R12 UHF E21 - E69PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR)M.NTSC Playback from M. NTSC Video recorders (VCR)NTSC (AV input only) Playback from NTSC Video recorders (VCR)Aerial - Rear VHF / UHFOperating Conditions Temperature : 5 °C - 35 °CHumidity : 5 % - 90 % RH (non-condensing)Connection TerminalsAV1 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)AV2 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)AV3 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)AV4VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω)S-VIDEO Mini DIN 4-pin Y:1.0 V[p-p] (75 Ω) C:0.286 V[p-p] (75 Ω)AUDIO L - R RCA PIN Type × 2 0.5 V[rms]OthersCOMPONENT Y 1.0 V[p-p] (including synchronization)PB , PR ±0.35 V[p-p]HDMI1/2 TYPE A ConnectorsPC HIGH-DENSITY D-SUB 15PIN R,G,B/0.7 V[p-p] (75 Ω)HD, VD/TTL Level 2.0 - 5.0 V[p-p] (high impedance)AUDIO L - R RCA PIN Type × 2 0.5 V[rms]Card slot SD CARD slot × 1Output AUDIO L - R RCA PIN Type × 2 0.5 V[rms] (high impedance)Dimensions ( W × H × D ) 724 mm × 549 mm × 300 mm (With TV Stand)724 mm × 487 mm × 141 mm (TV only) 857 mm × 625 mm × 300 mm (With TV Stand)857 mm × 563 mm × 141 mm (TV only)Weight 19.5 k Net 22.5 k Net38 39SD Card: On screen messagesMessage Meaning/ActionSpecificationsNote• Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.• This equipment complies with the EMC standards listed below.EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024.Cautions in handling SD Card :• Do not remove the card while the TV is accessing data ("blue" LEDOn) (this can damage card or TV).• Do not touch the pins on the back of the card.• Do not subject the card to a high pressure or impact.• Insert the card in the correct direction (otherwise, card may bedamaged).• Electrical interference, static electricity, or erroneous operation maydamage the data or card.• Back up the recorded data at regular intervals in case of deterioratedor damaged data or erratic operation of the TV. (Panasonic is notliable for any deterioration or damage of recorded data.)WARNING: As with an small object,SD card can be swallowed by youngchildren. Do not allow children tohandle SD card. Please remove SD cardimmediately after use.Is SD Card in?• Insert a SD card.SD Card is lockedPlease unlock to operate • Unlock the SD card.This file is lockedPlease unlock to operate • Unlock the file in the card.This type of format is notsupported • The TV does not support the format.(For the applicable formats and data, see p. 35.)This type of card is notsupported • A card not supported by the TV has been inserted.(For the supported cards, see p. 35.)Broken fileCannot display image • The file is broken.Memory full• The card memory is full.Not enough memory• The card does not have enough memory to operate.Cannot read file• The file is not readable.Unrecordable sourceSD recording is stopped • That channel cannot be recorded.(Recording is automatically stopped.)ErrorCheck card • Re-insert the card. If the error persists, format the card. (p. 25)Card recording in progressPlease stop recording to operate • That operation is not available during recording.To continue the operation, stop recording.( For example, changing channels while recording a TVprogramme. )Delete file? • Displayed when you press Red colour button to delete aMPEG4 file. Press OK button to confirm deleting.Blue LED

/ 20

Related manuals for Panasonic Viera TX-26LX600F