Panasonic VL-MN1000 Installation And Operating Instructions Manual

Panasonic VL-MN1000 Installation And Operating Instructions Manual Manual pdf 14 page image

4.4 Transferring callsWhile talking on a call, you can transfer the call to anotherroom monitor within your residence or to anotherresidence.1 While talking on a call, tap “Forward”.2 Transferring within your residenceEnter “#” and the extension number (0–4), tapoutside of the on-screen keypad to close it, and thentap “OK”.R Your room monitor calls the other room monitor.Transferring to another residenceEnter the room number, tap outside of the on-screenkeypad to close it, and then tap “OK”.R Your room monitor calls the other residence.3 Perform one of the following.– Tap “Return” to return to the original call.– Tap “Hang Up” after the other person answers.The other person will be connected to the call,and your room monitor will be disconnectedautomatically.Answering a transferred callWhen another room monitor user transfers a call to yourroom monitor, tap “Answer” to talk to the other roommonitor user. When the other user hangs up, you will beconnected to the call.4.5 Monitoring camera imagesYou can monitor live camera images from lobby stations,your own door stations, and other cameras installed inthe facility. While monitoring, you can see what ishappening at the camera, but no sound is heard.1 From the home screen, tap “Talk”.2 Tap “Monitor” on the left side of the screen.3 Select the desired tab.– “Lobby/Door”: Allows you to select a lobbystation or door station camera.– “IP Camera”: Allows you to select a standalonecamera installed elsewhere in the facility.4 Select the desired camera.5 When finished, tap .Calling the camera while monitoringWhile monitoring a lobby station or door station, you cancall and talk to a visitor. To call, press M N.Features available while monitoring camera images– “Previous”: Displays the image from the previouscamera in the list.– “Next”: Displays the image from the next camera inthe list.– “Record”*1: Records camera images and savesthem in your room monitor as a video file. Whenrecording, press “Stop” to stop recording.– “Snapshot”*1: Captures a still image (i.e., picture)from the camera and saves it in your room monitor.– “Return”: Cancels monitoring.– “Call Centre”: Allows you to call a common areaphone or the facility staff office.Note:R Certain features may not be available depending onsystem configuration.R “Unlock” is not available when monitoring cameraimages.*1 Not available when monitoring a standalone camera(IP camera).144. Talking and monitoring features