Panasonic VIDEOLARM PCF3 Product Instructions

Panasonic VIDEOLARM PCF3 Product Instructions Manual pdf 1 page image

PRODUCT INSTRUCTIONSSTANDARD INSTALLATION PROCEDUREINCLUDES MODELS: PCF3, PCV3Remove equipment from box, contents include:CONTENTS INCLUDE:(1) Flush Mount Box(1) Cover plate with window(2) Allen wrench security head tool(2) Stainless steel 6-32x1/2" captive Security head screws(1) Camera mount bracket(1) Camera mount arm(1) Bottom mount bracket(2) 4-40 x 1/4" screws(2) Star washers(2) 2-56 x 3/16" Screws(1) Camera, lens, and PC Board1. Locate the area on the wall where the housing will beinstalled and cut a 2 1/4" x 3 3/4" hole into the wall.2. Run the necessary wiring/cables to this cutout and pullwiring/cables through opening.3. Using the security tool, loosen the 2 security headscrews on the cover plate and remove it.4. Feed the wiring/cables through one or more of thecable entry holes in the back of the flush mount box.5. Install the housing into the cutout in the wall andtighten the Phillips head screws on the front of thebox. This will pull the lock tabs forward to securethe box to the wall.6. Remove the top mount bracket. This will allow you toremove the camera/PC Board assembly from the unit.7. Once you have removed the camera assembly, makethe necessary connections to the PC Board.5. Hand place the top mount bracket and camera into theunit. Check the angle of the camera, remove thebracket/camera and make any necessary adjustments.Once you have achieved the desired camera angle,reattach the top bracket and camera to the housing.Fine focusing can be achieved by manually rotating thelens.6. Fine focusing (see diagram below):Fixed Lens: Manually rotate the lens until a clear picture isachieved.Vari-Focal Lens: First, adjust the Magnification Lock Screwto the desired magnification (telephototo wide angle). Tighten the Lock Screw.Next, adjust the Focus Lock Screw until aclear picture is achieved. Tighten theLock Screw.2 1/4"3 3/4"Cut OutLock TabScrewLock TabTop MountBracketLock TabScrewBottom MountBracketManufactured by:forBefore attempting to connect or operate this product, please read these instructions completely.81-IN3048-9922MODEL: Miniature CameraPCF3, PCV3CameraMount ArmUSE CLASS 2 POWER ONLY!Fixed Lens CameraPCF3Vari-focal Lens CameraPCV3Manual focusFocus Lock ScrewMagnificationLock ScrewCamera Fine FocusDESCRIPTION: Recessed Wall Housing, Color Camera

/ 3

Related manuals for Panasonic VIDEOLARM PCF3