Panasonic TX-68P200A Operating Instructions Manual

Panasonic TX-68P200A Operating Instructions Manual Manual pdf 25 page image

25Tuning MenuManual TuneThis Television has been factory tuned to all the major city channels. Use this tuning procedure only if you wish toreset individual Programme Numbers.The television should be switched ON and the TV/AV Switch set to TV.Using the Front Panel1. Push the button repeatedly until the TuningMenu is reached.2. Push the or Button to access the TuningMenu. (See page 22).3. Push the button to select Manual Tune.4. Push the or button to access ManualTune.5. Push the button to switch to “ChangeProgramme”.6. Use the or buttons to select theprogramme location number to tune.7. Push the button to switch to “Search”.8. Push the or button to start the search.9. The television will automatically search for thenext broadcast signal. As each station isfound the search will stop. If you do not wantthis station restart the search.10. Push the to store the selected station.11. Push the button to return the television tothe Tuning Menu.12. To return the television to normal operationpush the button on the remote control orrepeatedly push the button until the volumedisplay appears.Using the Remote Control1. Push the Set Up ( ) button.2. Push the or button to select theTuning Menu. (See page 22).3. Push the or button to access the TuningMenu.4. Push the or button to select theManual Tune.5. Push the or button to select the ManualTune.6. Push the or button to access theprogramme location number to tune.7. Push the or button to start the search.8. The television will automatically search for thenext broadcast signal. As each station is foundthe search will stop. If you do not want thisstation restart the search.9. Push the to store the selected station.10. Push the Set Up ( ) button to return thetelevision to the Tuning Menu.11. Push the button to return the television tonormal operation.29CH 29PROGRAMME -/+SEARCH -/+RETURN TV/AV EXIT“STR” BUTTON - STOREMANUAL TUNESTR F -/\/ +//\ TV/AV- , + : SEARCHTV/AV : MOVE CURSORSTR : TO STOREF : TO EXITMANUAL TUNE (FRONT PANEL)Tuning the Television to a VCR1. Turn the VCR On and either start a known tape playing or set the VCR Test Signal, if fitted, to On(refer to the VCR operating instructions).2. Perform the Manual Tuning procedure above. The television will treat the VCR as if it was a normaltelevision broadcast station.NOTES:1. The antenna lead must be connected to the VCR and the VCR RF-Out must be connected to the TVRF-In. Please refer to page 34.2. The picture and sound quality are usually much better if the VCR is connected using the AVTerminals. Please refer to page 35.