Panasonic TX-68P200A Operating Instructions Manual

Panasonic TX-68P200A Operating Instructions Manual Manual pdf 24 page image

24Tuning MenuAuto TuneThis television has been factory tuned to all major city channels. Use the automatic tuning procedure only if youwish to reset ALL Programme Location Numbers. Refer to “Manual Tune” on page 27 if you only want to retune oneor two Programme Location Numbers.The television should be switched ON and the TV/AV Switch set to TV.When you start the automatic search, the television will automatically search for television broadcasts through bothVHF bands and the UHF band. During this process all of the available television broadcast channels will beautomatically allocated to sequential Programme Number locations depending on the mode selected (See page 25).Using the Front Panel Using the Remote Control1. Push the button repeatedly until the TuningMenu is reached. (See page 22).2. Push the or Button to access the TuningMenu.3. Push the button to access Auto Tune.4. Push the or Button to start the search.1. Push the Set Up ( ) button.2. Push the or button to select theTuning Menu. (See page 22).3. Push the or button to access the TuningMenu.4. Push the or button to select the AutoTune.5. Push the or button to start the Auto Tune.Push the Set Up ( ) button to return the television tothe Tuning Menu.Push the button to return the television to theTuning Menu.SETUP : RETURN TO TUNING MENUTV/AV : TO EXITAUTO SETUP IN PROGRESSSEARCHING :STORED CH2929CH 29Push the TV/AV button to return the television to normal operation.STR F -/\/ +//\ TV/AVTUNING MODEF : NO - , + : YESThe television will automatically allocate each received broadcast signal to a Programme Number. Aseach station is stored the Panasonic logo will appear momentarily. The operation will cease when allavailable channels have been tuned.F : RETURN TO TUNING MENUTV/AV : TO EXITAUTO SETUP IN PROGRESSSEARCHING :STORED CH2929CH 29