Panasonic TX-29P300K Operating Instructions Manual

Also see for TX-29P300K: Service manual

Panasonic TX-29P300K Operating Instructions Manual Manual pdf 33 page image

33PICTURESOUNDSET UPTV/TEXT F.P. INDEXSTILLHOLD100Hz/PROGRESURROUNDASPECT1 2 34 5 67 8 9CH SEARCHTV/AVSurround SoundPress the SURROUNDto confirm that the Surround feature is On. If the on screen messagethat appears indicates Surround is Off, press again to turn the feature On.Note:If Surround is Off, the sound output is two channel (ie: left and right)stereo or mono.Code Front outputs Rear surround outputs1+1Left CentreRight Left RightDual mono outputMono outputMono outputMono output1/02/03/02/13/12/23/2If a DTS / Dolby Digital input is detected the Surround menu optionsinstantly change – Surround mode is not available. Ensure that theDigital Audio option in the SOUND menu is set to the correct AVinput (see page 23). A message displayed in the centre of the screenshows whether the signal is DTS or Dolby Digital, and gives a codeindicating which channel are detected (see table to the right).Subwoofer output is not listed; if a subwoofer channels is detectedthen its contents are output.The volume adjustment sets the overall Surround output volume.When a DTS / Dolby Digital input is not detected this optionis shown. Choose between PRO LOGIC and SIMULATED.The mode chosen here dictates the next menu option.If a DTS / Dolby Digital input is detected, or if Pro Logic isselected in Surround mode, this menu option is Speakersetting, allowing selection of NORMAL, PHANTOM or 3STEREO modes, as described on page 35.If Simulated is selected in Surround mode, this menuoption is Simulated setting, allowing selection of DISCO,MOVIE or STADIUM modes, as described on page 35.Allows adjustment of the volume for each speaker, asdescribed on page 35.Allows setting of the distance from the listening positionto the front speakers.1M 3M 4M2M8M 6M 5M7MAllows setting of the distance from the listening position tothe rear speakers. If the rear surround speakers are closerto you than the centre speaker, you may hear dialogue“leakage” from the rear surround speakers. It may benecessary to reduce the volume of the rear speakers.1M 3M 4M2M8M 6M 5M7MIf you do not have an external centre speaker connected,set to On. If you wish to connect an external centre speakerthen switch Off, see page 13 for connection details.VOLUMESURROUNDMODESPEAKERSETTING/SIMULATEDSPEAKERLEVELFRONTDISTANCEREARDISTANCEINTERNALSPEAKERVOLUMESURROUND MODESIMULATED SETSIMULATEDSURROUND MENUDISCOSPEAKER LEVEL ACCESSIf a DTS / Dolby Digital input is detected,the Surround menu is as shown above(no Surround mode available).VOLUMESPEAKER LEVELSIMULATED SETSURROUND MENUDISCOSURROUND MODE SIMULATEDIf no DTS/Dolby Digital input isdetected, Surround mode appearsas a menu option.1 Press SOUND.2 Select to Surround menu by using or .3 Access Surround menu by using or .Press TV/AVto go back to watching TV.4 Move to chose menu option by using or .5 Adjust chosen option or access chosen menu by using or .