Panasonic TX-29P300K Operating Instructions Manual

Also see for TX-29P300K: Service manual

Panasonic TX-29P300K Operating Instructions Manual Manual pdf 21 page image

21Picture MenuHelpful Hint ( Normalization)COOLWARMSTANDARDNote:• We recommend that you set Scan mode to Progressive when viewing a PAL 60or NTSC transmission. When viewing a PAL transmission (other than PAL 60)with Scan mode set to Progressive, the screen will flicker, this is not a fault.AUTOAISCAN MODEPICTUREP-NRONWEAKAutomatically reduces unwanted picture noise.Press or to switch between modesWEAKSTRONGOFFAUTOAutomatically analyses the incomingpicture and processes it to give improvedcontrast and optimum depth of field.AUTOAISCAN MODEPICTUREP-NR WEAKONAISCAN MODEPICTUREP-NR WEAKONAUTOLets you choose the screen refresh method:Press or to switch between modesPROGRESSIVE100 Hz MODEAUTOMODE FunctionAUTO100 Hz MODEPROGRESSIVEThe TV software will select the best modefor the signal being viewed.100Hz will give a steady picture for mostsignal transmission.Recommended when receiving NTSCsignals.C. TEMP(Colour Temperature)P-NR(Picture NoiseReduction)AISCAN MODEAIlows you to set the overall colour toneof the picture.Press or to switch between modesCONTRASTBRIGHTNESSCOLOURSHARPNESSNTSC-TINTC. TEMPMENU SOFTSTANDARDPICTURETV/TEXT F.P. INDEXSTILLHOLD100Hz/PROGRESURROUND1 2 34 5 6CH SEARCHSwitching is also possible using 100Hz/PROGRE on the remote control.By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changedto the Normal Mode.Normalization will not occur if the menu is not displayed when the “N” Button is pressed.The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.