Panasonic TX-29P300K Operating Instructions Manual

Also see for TX-29P300K: Service manual

Panasonic TX-29P300K Operating Instructions Manual Manual pdf 28 page image

281.If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the “Colour SystemSelection” operation on page 27.2.After the Automatic tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each ProgrammeNumber. If some Programme Numbers are unused, it is possible to skip such Programme Numbers. Please refer to the ProgrammeSkip function on page 27.Helpful HintPICTURESOUNDSET UPTV/TEXT F.P. INDEXSTILLHOLD100Hz/PROGRE CH SEARCHTV/AV1 Press SET UP.2 Move to chosen menu option by using or .3 Access Tuning menu by using or .4 Move to chosen menu option by using or .5 Access AUTO TUNE by using or .Notes:• If you proceed with the next step all tuning data will be erased (all stationsand their programme positions stored in your TV's memory will be wiped outso the new settings can be stored).• If you exit the procedure after this point and before AUTO TUNE iscomplete, no station information will be stored. Restart and completethe AUTO TUNE procedure so that the TV is re-tuned.6 Start AUTO TUNE by using or .Once this operation is completed the TV will display the programme nowstored on programme position 1.Press TV/AVat any time to go back to watching TV (please read the Notein the above procedure).CH 2929AUTO SETUP IN PROGRESSSEARCHING :SETUP : RETURN TO TUNING MENUT V / AV : TO EXITSTORED CH29Auto tune (via front panel)It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions1 Press F (Front panel) until Tuning mode is reached.2 Press –/ or +/ to access Tuning mode.3 Press F (Front panel) to access Auto tune.4 Press –/ or +/ to start search.When the desired station is found, press STR to store.The programme position will flash.Repeat above procedure to tune additional programme positions.Press F at any time to exit the Tuning menu.100Hz PROGRESSIVE PIP TEXT TX-34P250TSTR F –/ +/ TV/AVTuning MenuBefore Auto tune, set the “SYSTEM SELECTION” and “CHANNEL SELECT” mode.Auto tune