6Quick Start GuideConnection and setting up optionsPlease ensure that the unit is disconnected from the mainsbefore attaching or disconnecting any leads.Scart cables(Not supplied)SET TOP BOXVCR / DVDRecorderRF cable(Not supplied)RF cable (Not supplied)ORPlug in aerial and connect ancillary equipment.Scart Connections• The VCR / DVD Recorder can be connected to the TV using a Scart cable, if you are using a Scart equipped VCR/ DVD Recorder.• Use the TV’s any Scart terminal for any VCR. Always use a “fully wired” Scart cable.• Use the TV’s AV1 or AV2 Scart terminal for any DVD Recorder. Always use a “fully wired” Scart cable.• Use the TV’s AV1 or AV2 Scart terminal for Satellite Receiver. Always use a “fully wired” Scart cable.RF Connection• Connect the RF cable to the “Aerial In” terminal of the VCR / DVD Recorder and an RF cable from the VCR / DVDRecorder “Aerial Out” terminal to the TV Aerial terminal ( ).Notes:• If using a “Q-Link” VCR / DVD Recorder, then the AV1 Scart of the VCR / DVD Recorder must be connected to theAV1 or AV2 terminal of the TV. If your VCR or DVD Recorder is not a “Q-Link” device, please consult the operatinginstruction book for that product. Further information on Q-Link can be found on page 21.• Further details of Audio / Video connections can be found on page 28-30.• Additional equipment and cables are not supplied.