Panasonic TX-26LX60LA Operating Instructions Manual

Panasonic TX-26LX60LA Operating Instructions Manual Manual pdf 20 page image

20Shipping conditionPress the MENU button.Move to Setup menu.Access Setup menu.Move to Shipping condition.Access Shipping condition.Press the OK button to start.Press again, to confirm, each time that you are asked, “Are you sure?”.Switch the TV off at the mains power switch.The next time you switch the TV on, Auto setup will begin. Analoguestations will be located, sorted and stored ready for use. See page 7.Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to yournew local stations.Note:Owner ID information will not be affected by this function.This can be done either through the Shipping condition menu or through the Auto setup menu.The Shipping condition menu will reset all data, except Owner ID information, clearing all Analogue tuning informationand resetting all control levels back to factory settings.You may need to adjust your VCR or programme position ‘0’ VCR after operating the Shipping condition menu.All tuning data will be erasedAre you sure ?Are you sure ?Shipping conditionExitReturnStartMENUOKTVN1 2 34 5 67 8 90OKCControl with HDMIAV1 outOnMonitorQ-LinkAV2 outOff timerTuning menuOwner IDSetup menu AV2MonitorOffPower on preference TVAccessTeletext FASTEXTShipping condition