Panasonic TX-22LT2M Operating Instructions Manual

Panasonic TX-22LT2M Operating Instructions Manual Manual pdf 6 page image

6Quick start Guide2. Connecting the AC Adaptor2131 Connect the mains lead to the AC Adaptor.2 Connect the AC Adaptor DC plug to the DC INsocket.3 Plug into household mains socket.• Be sure to use the power cord and AC adaptorincluded in the accessories.• Do not use the AC adaptor for other than thespecified equipment.• Unplug the AC adaptor if it is not used for longtime.• Do not place any objects on the AC adaptor.• Do not use the AC adaptor outdoors.• Do not attempt to repair the AC adaptor if it isbroken or malfunctioning. Refer the servicingto the service representative.• Do not try to open the AC adaptor.• Do not use water or wet cloth for cleaning theAC adaptor.3. Switch TV ONPower-IndicatorThe RED LED whenlit indicates that notonly the TV set is instand-by mode butalso the external ACadaptor is still on.TX-22LT2Press to turn the set on.IMPORTANT NOTESThere are two ways to switch the TV set to stand-by mode.(A) Press the switch on the LCD TV and checkRED LED is lit.OR(B) Press the Stand-by button on the remotecontrol.The TV set can be switched on by the remotecontroller if it was switched to stand-by usingmethod (A) or method (B).When programme number up ( )/down ( )buttons on the side panel of the main part oron the remote control are pressed in stand-bymode, TV turns on.