Panasonic TX-22LT2M Operating Instructions Manual

Panasonic TX-22LT2M Operating Instructions Manual Manual pdf 16 page image

161 Press to select MANUAL TUNE.Press to access MANUAL TUNE.2 Press to select the desired Programme Number.Press to search the higher or lower channel.3 When the desired station is found, press to store.The programme position will flash.Press at any time to go back to watching TV.SYS SELECTSOUND SYSCOLOUR SYS5.5MHzSKIP OFFAUTOASIA/M. EASTCH SELECT DIRECTFINE TUNETUNING MENUAUTO TUNEACCESSMANUAL TUNETUNING MENUMANUAL TUNEBefore MANUAL TUNE, set the “CH SELECT” and “SYS SELECT”.Follow the step on page12 to display the TUNING MENU screen.E X I TRETURN TV/AVSEARCH – /+PROGRAMME – /+BUTTON STORE’STR’MANUAL TUNECH 22MANUAL TUNE (via side panel)It is also possible to use the control panel buttons on the side of the TV to tune individual programme positions.CH 25.5 MHz2MANUAL TUNE (SIDE PANEL)— / + : SEARCHTV/AV : MOVE CURSORSTR : TO STOREF : TO EXIT1 Press (Side panel) until Tuning mode is reached.2 Press or to access Tuning mode.3 Press to move between Change programme, Search and ChangeTV system.4 Press or to change programme position or start search.When the desired station is found, press to store.The programme position will flash.Repeat above procedure to tune additional programme positions.Press at any time to exit the Tuning menu.1. If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour System Selection”operation on page 14.2. After the Manual tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for eachProgramme Numbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.3. When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicatedin the instruction manual of VCR and to set the designated channel to programme No.“0”. In that case, perform manual tuneafter setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set thedesignated channel to several programme Numbers.Helpful HintPICTURESOUNDSET UPTV/AVSTRHELPTV/AV