Panasonic TH-85PF12E Operating Instructions Manual

Also see for TH-85PF12E: Operating instructions Brochure & specs Operating instructions

Contents

Panasonic TH-85PF12E Operating Instructions Manual Manual pdf 45 page image

45PIP—Off0%Off1MULTI PIP SetupMULTI PIPDisplay ModeTransparencyTransparency levelInsertInsert level2/2SetupMULTI DISPLAY SetupMULTI PIP SetupPortrait SetupSet up TIMERMULTI PIP SetupSet the two-screen display function that is activated when is pressed.Press to select the MULTI PIP Setup.Press to display the “MULTI PIP Setup” menu.Press to display the Setup menu.123 Press to select the menu to adjust.Press to adjust the menu.Sub Screen Insertion (During BLEND PIP)1 Select “On” in “Insert”.2 Set the “Insert level”. (1 to 10 %)Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas onthe sub screen.Setting example Image to insert (sub screen) Insert levelBackground image(main screen) Two-picture InsertionOnly the areas on the overlayimage that are brighterthan the “Insert level” aredisplayed on the backgroundimage.10 %1 %Note: “Transparency” cannot be set when “Insert” is “On”.Transparent Display of the Sub Screen (During Blend PIP)1 Select “On” in “Transparency”.2 Set the transparency level for the sub screen in “Transparency level”. (0 to 100 %)Setting example Transparent image (sub screen)0 %: No transparency 100 %: Fully transparentNote: “Insert” cannot be set when “Transparency” is “On”.Display ModeThe display mode can be changed separately for each function that was set in “MULTI PIP Setup”.For “PIP”: — (One screen) P and P P out P P in PFor “Advanced PIP”: — (One screen) 1 to 8For “Blend PIP”: — (One screen) Full P in PNote: The display mode changes in the same way when is pressed.MULTI PIPSet the two-screen function.PIP Advanced PIPBlend PIP