SLOT2AUDIODVI-D INSLOT3PR /CR /R PB/CB /B Y/GCOMPONENT/RGB INLANAUDIOAUDIOOUTY, PB, PR,OUTP RPBYLRCOMPONENT VIDEO OUT11ConnectionsDVI-D connectionMini-plug (M3)DVI-Dvideo cable(Within 5 m)PC with DVI-Dvideo outPin No. Signal Name Pin No. Signal Name1 T.M.D.S. data 2- 132 T.M.D.S. data 2+ 14 +5 V DC3 T.M.D.S. data 2 shield 15 Ground4 16 Hot plug detect5 17 T.M.D.S. data 0-6 DDC clock 18 T.M.D.S. data 0+7 DDC data 19 T.M.D.S. data 0 shield8 209 T.M.D.S. data 1- 2110 T.M.D.S. data 1+ 22 T.M.D.S. clock shield11 T.M.D.S. data 1 shield 23 T.M.D.S. clock+12 24 T.M.D.S. clock-Notes:• Additional equipment, cables and adapter plugs shown are not supplied with this set.• Refer to page 61 for applicable input signal.• Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length orthe quality of the cable.DVI-D Input ConnectorPin LayoutsConnection port view1617248 19COMPONENT / RGB connectionNotes:• Change the “Component/RGB-in select” setting in the “Setup” menu to “Component”(when Component signal connection) or “RGB” (when RGB signal connection). (see page 48)• Additional equipment, cables and adapter plugs shown are not supplied with this set.• Sync on G signal is needed. (see page 52)RCA-BNCadapter plugMini-plug (M3)Computer RGB CamcorderorDVDExample of input signal sourceDigital TV-SET-TOP-BOX(DTV-STB)This unit has terminal boards equivalent to DVI-D Terminal Board (TY-FB11DD) as standard equipment.