Panasonic TH-50PB2W Operating Instructions Manual

Also see for TH-50PB2W: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-50PB2W Operating Instructions Manual Manual pdf 34 page image

34Set Touch Pen mode.Select “Touch-Pen Settings” in “Setup” menu and press button.When a Terminal Board with dual input terminals is installed, “SLOT INPUT” isdisplayed as “SLOT INPUT A” and “SLOT INPUT B”.Touch-Pen SettingsOffCOMPONENTHDMIOffVIDEO OffSLOT INPUT OffOffOffNETWORKOffDetectedStandby pen charging modePen adapter statusPairingDVIPCOffTouch-Pen SettingsTouch-Pen Mode Touch OnlyWHITEBOARD function OffQuick WHITEBOARD launch OffTouch-Pen ModeSelect an appropriate setting for the function of the electronic pen used.Touch Only: Contact-type Touch PenTouch & Remote: Contact-type Touch Pen and remote pointerWHITEBOARD functionSets the built-in WhiteBoard (WhiteBoard mode) function. When this is set to “On”, the built-in WhiteBoard function isenabled and the WHITEBOARD input can be selected.Quick WHITEBOARD launchWhen this is set to “ON”, the built-in WhiteBoard will be in the standby mode when the plasma display is in the standbymode (power OFF with remote control) and the start up is quicker.Note:This setting is automatically turned “On” and cannot be changed in the following cases.When the power is supplied to the slotWhen “Control I/F Select” is set to “LAN”When “WEB Control” is set to “On”When “Standby pen charging mode” is set to “On”SLOT INPUT – NETWORKSet “On” or “Off” for each input terminal.If you switch to the input terminal that is set to “On”, the mode becomes Touch Penmode.“Touch-Pen: On” is displayed in Touch Pen mode.Notes:• The picture quality changes according to the settings of “Touch-Pen Mode” and On/Off state of each inputterminal.• The electronic pen cannot be used during Digital Zoom. (see page 20)• When using the electronic pen, adjust “Pos./Size” so that the screen of the computer can be correctly displayed.(see page 23)Setting the Remote ControlYou can also turn Touch Pen mode On/Off with the FUNCTION buttons on the remote control. (see page 44)In Touch Pen mode, the menus and functions are restricted as follows.Pos./Size menu 1:1 Pixel Mode: OnOver scan: OffPicture menu Picture Mode: “Normal” or “Dynamic” only. (see page 26)Setup menu Extended life settings Picture Mode: “Normal” or “Dynamic” only. (see page 39)Options menu Display size: UnavailableRotate: UnavailableASPECT Controls 16:9OnTouch-PenPen adapter statusNot detected: Electronic pen adapter is not connected.Confirming...: Immediately after connecting an electronic pen adapter and thebuilt-in WhiteBoard “Easy WhiteBoard” is starting up.Detected: Electronic pen adapter is connected.