Panasonic TH-50PB2W Operating Instructions Manual

Also see for TH-50PB2W: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-50PB2W Operating Instructions Manual Manual pdf 21 page image

21MULTI PIPYou can display two pictures, such as a video image and computer image, in a two-screen display.Notes:• If “Input lock” in Options menu is set to other than “Off”, two screen display function isn’t available (see page 51).• 2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed intwo-screen display.MULTI PIP SettingsSet the functions and mode for two-screen display in “MULTI PIP Settings” in the Setup menu. (see page 36)PIP ModeThere are two modes for two screen display:Pic in PicDisplays two input images combined.SLOT INPUT Main screen inputSub screen inputPic in WHITEBOARDDisplays the built-in WhiteBoard with the other input image combined.WHITEBOARDPCMain screen is fixed to WHITEBOARD.Inputs supported for the sub screen: HDMI/DVI/COMPONENT/PC/VIDEONote:SLOT INPUT and NETWORK cannot be displayed on the sub screen.Note:SD signal is displayed in 4:3 mode on the sub screen.Using Two Screen DisplaySet “MULTI PIP” in “MULTI PIP Settings” to “On” (see page 36).Two screen display appears.Using the FUNCTION buttonOn/Off of “MULTI PIP” switches.“MULTI PIP Settings” menu appears.Switching Sub Screen Position Changing the Size of Sub ScreenPress to switch the sub screen position. Press to change the size of the sub screen.Note:Alternatively, “Sub screen size” and “Sub screen position” in “MULTI PIP Settings” can be used for the sameoperation (see page 36).The following three system inputs are combined:A SLOT INPUT/NETWORKB HDMI/DVI/COMPONENT/PCC VIDEONote:Two screen display cannot be displayed with the same systeminputs such as HDMI―DVI combined.Note:Please use the “Function Button Settings” to set theFUNCTION button (see page 44).