Panasonic TH-50PB2W Operating Instructions Manual

Also see for TH-50PB2W: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-50PB2W Operating Instructions Manual Manual pdf 48 page image

48Setup for Input Signals• SyncThis function operates only during input from PC IN terminal.Setting RGB sync signalConfirm that the input is set to RGB input (this setting is valid only for RGB input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.Setting Component sync signalConfirm that the input is set to Component input (this setting is valid only for Component input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.Note:Signals input to COMPONENT/RGB IN terminals correspond to Sync on G or Sync on Y.• SDI ThroughSet the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).On OffOn: Enables active through.Off: Disables active through.Note:Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board(TY-FB11DHD) is selected.• HDMI RangeSwitches the dynamic range according to the input signal from HDMI terminal.Video(16-235) Full(0-255) AutoVideo(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD playerFull(0-255): If the input signal is full range, Example: HDMI terminal output for personal computerAuto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.Note:This function can be set only for HDMI signal input.