30Input ModePC Resolution:StandardResolutionActive Resolution Refresh Rate Dot Clock Aspect Ratio Stand for ModeH Pixels V LinesVGA 640480 60 Hz 25.175 MHz4:3 Video GraphicArray480 72 Hz 31.5 MHz480 75 Hz 31.5 MHzWVGA 720 400 70 Hz 33.75 MHz 16:9 Wide VideoGraphic ArraySVGA 800 600 60 Hz 40 MHz 4:3 Super VGA600 75 Hz 49.5 MHzXGA 1024 768 60 Hz 65 MHz 4:3 ExtendedGraphic Array768 75 Hz 78.75 MHzWXGA 1280 768 60 Hz 79.5 MHz 5:3 Wide XGAWXGA 1280 800 60 Hz 79.5 MHz 16:10 Wide XGASXGA 1280 960 60 Hz 108 MHz 4:3 Super XGASXGA 1280 1024 60 Hz 108 MHz 5:4 Super XGAWXGA 1360 768 60 Hz 85.5 MHz 16:9 Wide XGAWXGA 1366 768 60 Hz 85.5 MHz 16:9 Wide XGAUXGA 1600 1200 60 Hz 162 MHz 4:3 Ultra XGAHD1080 1920 1080 60 Hz 148.5 MHz 16:9 HD1080SDTV Resolution:StandardResolutionActive Resolution Refresh Rate Dot Clock Aspect Ratio Stand for ModeH Pixels V Lines480i 720 480 29.97 Hz 13.5 MHz 4:3 Modified NTSC480p 59.94 Hz 27 MHz Standard576i 720 480 25 Hz 13.5 MHz 4:3 Modified PAL576p 50 Hz 27 MHz StandardHDTV Resolution:StandardResolutionActive Resolution Refresh Rate Dot Clock Aspect Ratio Stand for ModeH Pixels V Lines720p 1280 720 50 Hz 74.25 MHz 16:9 Normally DVBMode60 Hz1080i 1920 1080 25 Hz 74.25 MHz 16:9 Normally ATSCMode30 Hz1080p 1920 1080 50 Hz 148.5 MHz 16:9 Normally ATSCMode60 Hz• The PC text quality is optimum in HD 1080 mode (1920 × 1080, 60 Hz).• Your PC display screen might appear different depending on the manufacture (and your particular version of Windows).• Check your PC instruction book for information about connecting your PC to a monitor.• If a vertical and horizontal frequency-select mode exists, select 60 Hz (vertical) and 31.5 KHz (horizontal). In somecases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC isdisconnected). If so, press the [INPUT] button to enter the video mode. Also, make sure that the PC is connected.• When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.• The display settings table complies to the IBM/VESA standards, and based on the analog input.• The DVI support mode is regarded as same to the PC support mode.• The best timing for the vertical frequency to each mode is 60 Hz.