Panasonic TH-47LFV5W Operating Instructions Manual

Also see for TH-47LFV5W: Service manual Operating instructions

Panasonic TH-47LFV5W Operating Instructions Manual Manual pdf 27 page image

27TILINGWith this function you can create a single large-screen matrix(video wall) that consists of up to 25 sets of this Display (upto 5-set each at the vertical and horizontal side).EXIT MENU:SEL +-:ADJ :RETURN :EXIT MENUTILINGH MONITORSV MONITORSPOSITIONFRAME COMP.ENABLE111OFFOFFExample: 2 × 2 screen matrix (4 displays)H MONITORS = 2 displaysV MONITORS = 2 displaysV MONITORSH MONITORSPOSITIONExample: 5 × 5 screen matrix (25 displays)H MONITORS = 5 displaysV MONITORS = 5 displaysPOSITIONV MONITORSH MONITORS• H MONITORS - Select the number of displays on thehorizontal side.• V MONITORS - Select the number of displays on thevertical side.• POSITION - Select the position of this Display in thescreen matrix.• FRAME COMP. - Choose to turn the frame compensationfunction on or off. If turned on, this Display will adjust theimage to compensate for the width of this Display bezelsin order to accurately display the image.• ENABLE: Choose to enable or disable the Tilingfunction. If enabled, this Display will apply the settingsin {H MONITORS}, {V MONITORS}, {POSITION}, and{FRAME COMP.}.NOTES: A setup of TILING can be set up for each input,individually.POWER ON DELAYSelect the delayed time until the power-on mode is activatedafter the power is turned on manually or automatically. Thissetting is useful in hiding start-up messages and powering onthe connected devices at different timings.The options are: {OFF}, {2 SEC.}, {4 SEC.}, {6 SEC.},{8 SEC.}, {10 SEC.}, {20 SEC.}, {30 SEC.}, {40 SEC.},{50 SEC.}.CONFIGURATION2 RESETReset all settings in the CONFIGURATION2 menu to factorypreset values.CONFIGURATION3 menu123SET EXIT MENU3:SEL :NEXTPOWER SAVEHEAT STATUSSCREEN SAVER:RETURN :EXIT MENUSIDE BORDER COLORCONFIGURATION3 RESET51CONFIGURATION3POWER SAVESet this Display to reduce the power automatically.EXIT MENU:SEL +-:ADJ :RETURN :EXIT MENUPOWER SAVERGBVIDEOONON• {RGB} - Select {ON} to let this Display enter power savingmode with no signal detected from the HDMI, DVI, or PCinputs after 30 seconds.• {VIDEO} - Select {ON} to let this Display enter powersaving mode with no signal detected from the VIDEO orDVD/HD inputs after 30 minutes.HEAT STATUSThis function allows you to check the thermal status of thisDisplay at any time.EXIT MENU:RETURN :EXIT MENUHEAT STATUSCOOLING FAN OFFTEMPERATURE:SENSOR 1SENSOR 235.7 C / 96.2 F30.2 C / 86.3 F