Panasonic TH-47LFV5W Operating Instructions Manual

Also see for TH-47LFV5W: Service manual Operating instructions

Panasonic TH-47LFV5W Operating Instructions Manual Manual pdf 29 page image

29LAN SETTINGAssign {IP ADDRESS}, {SUBNET MASK}, and {DEFAULTGATEWAY} for this Display.123EXIT MENU:SELDHCP CLIENTIP ADDRESSSUBNET MASKDEFAULT GATEWAY:RETURN :EXIT MENUOFF+-:ADJADVANCED OPTIONLAN SETTING• DHCP - Choose to enable or disable the DHCP function. Ifenabled, this Display will be assigned IP address, Subnetmask and Default gateway automatically. If disabled, youwill be prompted to enter the following value manually.INITIAL INPUTSelect the input source you want this Display to initiate eachtime after turning power on.CALIBRATION DATA SAVESave the data of color calibration executed and adjusted byuser at any timing.CALIBRATION DATA LOADBy read this data, PD will get back to state at the timing whenuser executed color calibration and adjusted.Note: The data that saved and loaded by CALIBRATIONDATA SAVE and LOAD, are below items.- The adjustment data of white balance for each “COLORTEMPERATURE” (3000K to 10000K, and NATIVE, USER)- “BRIGHTNESS” data when picture mode is in STANDARDmode- GAMMA data for each GAMMA curve.ADVANCED OPTION RESETReset all settings in the ADVANCED OPTION menu to factorypreset values.1. Press [SET] button to enter the submenu.2. Press [ ] or [ ] button to select {YES}, and then press[SET] button to do the reset.EXIT MENUSET:SEL :RETURN:SET :EXIT MENUADVANCED OPTION RESETNOYESFACTORY RESETReset all the settings in the OSD menus of {PICTURE},{SCREEN}, {AUDIO}, {CONFIGURATION1},{CONFIGURATION2}, {CONFIGURATION3}, and{ADVANCED OPTION} to factory preset values.1. Press [SET] button to enter the submenu.2. Press [ ] or [ ] button to select {YES}, and then press[SET] button to do the reset.EXIT MENUSET:SEL :RETURN:SET :EXIT MENUFACTORY RESETNOYES