Panasonic TH-42PRT12U Operating Instructions Manual

Also see for TH-42PRT12U: Manual de instrucciones

Panasonic TH-42PRT12U Operating Instructions Manual Manual pdf 10 page image

10Preparation for Wall-hangingAccessoriesBefore mounting the display on the wall, you must remove the pedestal from the display.Follow the steps below:1 Disconnect all the cables from the display.2 Remove the pedestal.A Remove the four screws.B Pull out the pedestal.Foam mat or thicksoft clothWARNING•Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.Any damage resulting from not having a professional installer mount will void your unit’s warranty.•Always be sure to ask a qualified technician to carry out set-up.Incorrect fitting may cause equipment to fall, resulting in injury and product damage.•Do not mount this Plasma display directly below ceiling lights (such as spotlights, floodlights, or halogen lights) whichtypically give off high heat. Doing so may warp or damage plastic cabinet parts.•Place the display at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (includingreflections) will fall on the screen.Use of some types of fluorescent lighting can reduce remote control transmitter range.Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat ormoisture.■How to use the pedestalAdjust the stand to your desired angle.The stand angle can be rotated 15° to the right / left.LocationPOWER(View from above)PDP panel side15 ° 15 °BAA15 ° 15 °