Panasonic TH-42PF30W Operating Instructions Manual

Contents

Panasonic TH-42PF30W Operating Instructions Manual Manual pdf 37 page image

ScreensaverStartFunctionModeFinish TimeStart TimeScrolling bar onlyTime Designation6:1512:30PRESENT TIME 15:00ScreensaverStartFunctionModeOperating TimePeriodic TimeScrolling bar onlyInterval12:003:00PRESENT TIME 15:00ScreensaverStartFunctionModeScreensaver durationScrolling bar onlyStandby after SCR Saver6:15PRESENT TIME 15:0037After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become availablefor selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)Press to select Start Time / Finish Time(when Time Designation is selected).Press to select Periodic Time / Operating Time(when Interval is selected).Press to select Screensaver duration(when Standby after SCR Saver is selected).Press to setup.button: Forwardbutton: BackNote: Timer function will not work unless “PRESENT TIME” is set.Notes:• Pressing “ ” or “ ” button once changes the Time 1 minute.[However, switching occurs every 15 minutes when Periodic Time is selected.]• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.• “Screensaver duration” of the “Standby after SCR Saver” can be set from 0:00to 23:59. When this is set to “0:00”, “ Standby after SCR Saver” will not beactivated.Screensaver (For preventing image retention)Setup of Screensaver Time