29Picture AdjustmentsNotes:• You can change the level of each function(Contrast, Brightness, Colour, Hue, Sharpness)for each Picture Mode.• The setting details for Normal, Dynamic,Cinema and Monitor respectively are memorizedseparately for each input terminal.• In Contrast, there is not a noticeable changeeven when contrast is increased with a brightpicture or reduced with a dark picture.Advanced settingsOn the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time orthe ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)Item Effect AdjustmentsContrast Less MoreSelects the proper brightnessand density for the room.Brightness Darker BrighterAdjusts for easier viewing ofdark pictures such as nightscenes and black hair.Colour Less More Adjusts colour saturation.Hue Reddish Greenish Adjusts for nice skin colour.Sharpness Less More Adjusts picture sharpness.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R” , “W/B Low G” and “W/B Low B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.Item Effect DetailsBlackextension Less More Adjusts the dark shades of the image in gradation.Input level Less More Adjustment of parts which are extremely bright and hard to see.Gamma Down Up S Curve 2.0 2.2 2.6W/B HighR Less More Adjusts the white balance for light red areas.W/B HighG Less More Adjusts the white balance for light green areas.W/B HighB Less More Adjusts the white balance for light blue areas.W/B Low R Less More Adjusts the white balance for dark red areas.W/B Low G Less More Adjusts the white balance for dark green areas.W/B Low B Less More Adjusts the white balance for dark blue areas.