Panasonic TH-42PF30W Operating Instructions Manual

Contents

Panasonic TH-42PF30W Operating Instructions Manual Manual pdf 10 page image

10121 2ConnectionsSpeakerterminal (R)Speakerterminal (L)When connecting the speakers, be sure to use only the optional accessory speakers.Refer to the speaker’s Installation Manual for details on speaker installation.AC cord connection (see page 15)Speakers (Optional accessories)Using the clamperSecure any excess cables with clamper as required.Note:One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.AC cord connection and xing, cable xingSpeaker connectionPlug the AC cord into the display unit.Plug the AC cord until it clicks.Note:Make sure that the AC cord is locked onboth the left and right sides.AC cord xingUnplug the AC cordUnplug the AC cord pressing thetwo knobs.Note:When disconnecting the AC cord, beabsolutely sure to disconnect the ACcord plug at the socket outlet rst.While pressing the lever,insert the core wire.BlackRedReturn the lever.BlackRedholeTo loosen:hooksTo remove from the unit:Insert the clamperin a hole.Bundle the cablessnapsKeep pushingboth sidesnapsSet thetip in thehooksknobKeeppushingthe knobAttach the clamperWhen using the Wall-hanging bracket (vertical)Note:When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes andto secure the cables. If the clamper is used on the hole , the cables may be caught by thewall-hanging bracket.