Panasonic TH-42PF30W Operating Instructions Manual

Contents

Panasonic TH-42PF30W Operating Instructions Manual Manual pdf 35 page image

353D SettingsTo view the 3D images, please adjust and setup the 3D settings.Note:Set these settings for each input terminals.• 3D Picture Display3D 2D3D: Use of 3D Eyewear. You can see 3D images for 3D image signal and 2D images for 2D image signal.2D: No use of 3D Eyewear. You can see 2D images instead of 3D images.When set to “3D”, “3D” is displayed during 3D images.• 3D Picture Format3D images method is set.Auto: 3D images are automatically displayed according to the signal.Simultaneous: Set this format when selecting a slot that one of the following terminal boards is installed:Dual HD-SDI Terminal Board for 3D (TY-FB30DHD3D), Dual DVI-D Terminal Board for 3D(TY-FB30DD3D)Side by Side/Top and Bottom: One of the formats of the 3D standard. Select these formats as necessary.Native: Displays the input signal as it is. Use to identify the format type of the input signal.• 3D Picture SequenceReverse NormalThis function calibrates the timing to switch the right and left images as well as the timing to switch the shutter ofright and left 3D Eyewear.Select “Reverse” if you feel that the sense of depth is unusual.• Safety PrecautionsDisplays the precautions for viewing 3D images.Safety Precautions3D Settings3D Picture Format3D Picture Sequence3D Picture Display 3DAutoNormal3D Settings sub-menu screen1/2SignalScreensaverExtended life settingsInput labelOffStandby save OnPC Power management OffDVI-D Power management OffOSD Language English (UK)Component/RGB-in selectRGBPower saveSetup3D SettingsNo signal power off DisableNo activity power off DisablePCNANODRIFT16:93D