PRESENT TIME SetupPRESENT TIME MON 99:99SetPRESENT TIME 99:99DAY MONPRESENT TIME SetupPRESENT TIME MON 99:99SetPRESENT TIME 10:00DAY TUELandscapePortraitDisplay orientationItalianoEspañolENGLISH (US)English (UK)DeutschFrançaisOSD LanguageSetSelectOSD Language PRESENT TIME Setup Display orientationPower ON warning messageThe following message may be displayed when turning the unit power ON:Activate 3D Safety Precautions if you deliver 3D images to unspecied audiences for business or other purposes.If “3D Picture Display” in “3D Settings” is set to “3D”, a warning message is displayed every time the power isturned ON. (see page 35)3D Safety PrecautionsNo activity power off Precautions’No activity power off’ is enabled.If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time thepower is turned ON. (see page 41)These message displays can be set with the following menu: Options menu3D Safety Precautions (see page 56)Power On Message (see page 55)1 Select thelanguage.2 Set.1 Select “DAY” or“PRESENT TIME”.2 Setup “DAY” or“PRESENT TIME”.1 For vertical installation,select “Portrait”.2 Set.1 Select “Set”.2 Set.When 3D images will be viewed by unspecied number ofpeople or used for commercial applications, someone inauthority should convey the following precautions.These precautions should be followed in the home as well.3D Viewing/ 3D Content/ Viewing distance/ 3D Eyewearrecommendations- To enjoy 3D images safely and comfortably, pleaseread the Operating Instructions fully.16Power On / OffWhen rst switching on the unitFollowing screen will be displayed when the unit is turned on for the rst time.Select the items with the remote control. Unit buttons are invalid.Note:The screens are not displayed if a tuner board has been equipped when setting up. Also they will not be displayedfrom the next time the power is turned on after the settings are completed once.Make the settings in the following menus as necessary.OSD Language (see page 43)PRESENT TIME Setup (see page 34)Display orientation (see page 43)