34Specifi cationsTH-32LHD7BPower Source 220 - 240 V AC, 50/60 HzPower ConsumptionNormal use 165 WStand-by condition Save off 1.0 W, Save on 0.8 WPower off condition 0.4 WLCD Display panel 1,366 × 768 pixels widescreen LCD panel.Contrast Ratio 800:1Screen size 697.7 mm (W) × 392.3 mm (H)× 800.4 mm (diagonal)(No.of pixels) 1,049,088 (1,366 (W) × 768 (H))[4,096 × 768 dots]Operating conditionTemperature 0 °C - 40 °CHumidity 20 % - 80 %Applicable signalsColour System NTSC, PAL, PAL60, SECAM, Modified NTSCScanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p ·25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50iPC signalsWXGA displaySVGA, XGA, SXGA, UXGA ···· (compressed)Horizontal scanning frequency 15 - 110 kHzVertical scanning frequency 48 - 120 HzConnection terminalsAVVIDEO IN 1.0 Vp-p (75-ohm or high impedance)VIDEO OUT 1.0 Vp-p (low impedance)S VIDEO IN (MINI DIN 4PIN) Y:1 Vp-p (75-ohm), C:0.286 Vp-p (75-ohm)AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)COMPONENT/RGBY/G (BNC) Y or G with/sync 1.0 Vp-p (75-ohm)G without/sync 0.7 Vp-p (75-ohm)R B/B (BNC), PR /R (BNC) 0.7 Vp-p (75-ohm)AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)PC(HIGH-DENSITY D-SUB 15PIN) R,G,B/0.7 Vp-p (75-ohm)ComponentY : 1.0 Vp-p (75-ohm)PB •P R / CB •C R : 0.7 Vp-p (75-ohm)HD, VD/1.0 - 5.0 Vp-p (high impedance)AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLESPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)Accessories SuppliedRemote Control Transmitter EUR646538Batteries 2 × R6 SizeFixing bands (TMME203) × 2Ferrite core J0KF00000018 × 2, J0KG00000054 × 2Dimensions (W × H × D) 805 mm × 499.6 mm × 102 mm (exclusive of protruding portion)Mass (weight)main unit only approx. 17.0 kg netwith speakers approx. 21.0 kgNotes:• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.• This equipment complies with the EMC standards listed below.EN55013, EN55020, EN55022, EN55024, EN61000-3-2, EN61000-3-3.