Panasonic TH-32LHD7B Operating Instructions Manual

Panasonic TH-32LHD7B Operating Instructions Manual Manual pdf 19 page image

19Adjusting Picture Pos. / Size1 Press to display the Picture Pos. /Size menu.Press to select H-Pos / H-Size / V-Pos / V-Size /Clock Phase.Press to adjust Pos. / Size.Press to exit from adjust mode.32RPICTUREPOS. /SIZENotes:• Adjustment details are memorized separately for different input signal formats(Adjustments for component signals are memorized for 525 (480) / 60i ·60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF,1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals arememorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the pictureposition will shift up or down. This picture position movement cannot becontrolled by the Picture Pos./Size function.• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, theadjustment is not memorized. When exiting the mode, the screen will returnto a former adjustment.N RINPUTSURROUNDVOLPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCMULTIPIP SWAP SELECT MOVEZOOMNormalNormalisePicture Pos. /SizeV-PosH-PosV-SizeH-SizeNormalNormalisePicture Pos. /SizeV-PosH-PosV-SizeH-SizeClock PhaseWhile the Picture Pos. / Size display is active, if either the N button on the remote control is pressed at any time or theACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( N/ Normalise Normalisation)4During “RGB / PC” input signal.During “AV(S Video)”, “Component”and “DVI” input signal.H-Pos Adjust the horizontal position. H-Size Adjust the horizontal size.V-Pos Adjust the vertical position. V-Size Adjust the vertical size.Clock Phase(RGB/PC in mode)Eliminate the flickering and distortion.