Panasonic TC-32LH1 Operating Instructions Manual

Also see for TC-32LH1 - 32" LCD TV: Operating instructions

Panasonic TC-32LH1 Operating Instructions Manual Manual pdf 31 page image

31Operating peripheral equipment using the remote controlThe Universal Remote Control can be programmed to operate many manufacturers’ components, using thecomponent function buttons for VCR, DVD, AUX, RCVR, TV, DTV, CABLE or DBS. Follow the proceduresfor programming your Remote Control with or without a code for the component.Determine the manufacturer of the component and look in the table for the code.Programming The Illuminated Remote Control Using Access Codes1 Confirm that the external component is plugged in and operating.2 Turn the component off.345 Enter the 3-digit component code using the Remote Control numerickeypad.Press POWER and OK together, for at least 5 seconds.After 5 seconds, all the illuminated mode keys will begin to flash.Release the POWER and OK keys.POWER +1 2 34 5 67 809POWERCHCHVOL VOLO KDTVAUXDVDVCRDBSRCVRCBLTVPress the mode key.The mode key will illuminate steadily, all others will go out.Press the Remote Control POWER to test the component. If theprocedure is successful, the component will turn on.DeviceTVDTVCABLEDBSVCRDVD/CDAUXRCVROperatesTV (Panasonic Only)DTV (Panasonic Only)CABLE (Preset)DBS (Preset)VCR (Preset)DVD and CD (Preset)Personal Video Recorders,Tape and VCR2Audio Receiver (Preset)DefaultPanasonic TV CodesPanasonic DTV CodesPanasonic CABLE CodesPanasonic DBS CodesPanasonic VCR CodesPanasonic DVD CodesPanasonic Personal VideoRecorders CodePanasonic RCVR CodeDefault Modes For Remote Control6If the component does not operate with the Remote Control, repeat theprocedure using another code. (Some brands have multiple codes).If an incorrect code is entered, or if the procedure takes longer than 30seconds,the programming will fail.Helpful Hints: Unsuccessful Code