Panasonic TC-32LH1 Operating Instructions Manual

Also see for TC-32LH1 - 32" LCD TV: Operating instructions

Panasonic TC-32LH1 Operating Instructions Manual Manual pdf 12 page image

12ANT AUDIO INL RHDMI∗1 (HDMI : High Definition Multimedia Interface) is the first all digital consumer electronics A/V interfacethat supports uncompressed standard. One jack supports both video and audio information.This HDMI∗1 input can be connected to an EIA/CEA-861/861B∗2 compliant consumer electronic device,such as a Set Top Box or DVD player equipped with HDMI or DVI output connection.By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMIterminal of this television, high-definition pictures can be displayed on the screen in their digital form.∗1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarksof HDMI Licensing LLC.∗2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital videoincluding high bandwidth digital content protection.∗3. HDMI-DVI conversion cable part no. (TY-SCH03DH):available from the Panasonic National PartsCenter at 1-800-332-5368 or on the Panasonic Website (USA only) at www.panasonic.com.∗4. AUDIO-IN, Please refer to page 24. (HDMI-IN)If the external device has DVI output only, use a HDMI-DVIconversion cable∗3 to connect to the HDMI jack on the LCD.Also, connect the Audio out signal from the external device.(Set Top Box or DVD player) to the AUDIO IN∗4 jacks besidethe HDMI input.This model support following format.Please adjust the format of connecting equipment.1080i480P480iNo. of dots (H ××××× V)1,920 ××××× 1,080i720 ××××× 480P640 ××××× 480P720(1,440) ××××× 480iVertical scanning frequency(Hz)59.94/6059.94/6059.94/6059.94/60Applicable VIDEO SignalThis input terminal is not intended for use with computers.AUDIO signal (L.PCM)When the digital sound signal is included at connecting HDMI equipment, L.PCM sound is available.Sampling frequency48KHz / 44.1KHz / 32 KHzNotes:(1) This HDMI connector is Type A.(2) If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminalOutput setting, use the component Video input (or the S video Input or Video Input). In this case the picturewill be displayed as an analog signal.HDMI Cable (not included)HDMI or DVIsignal outSet Top BoxDVD playerAudio Cable(not included)How to connect the HDMI Terminal