59At the initial settings screen (on page 56)Press SELECT ( , ) to Select “3 MenuLanguage” and press ENTER.1This is to select the language to be used in the On-Screen Displaymenus which the player will show on the TV monitor.1 English2 Français3 EspañolPress RETURN to cancelSelect the languagefor these Menus.Also refer to “Common procedures” on page 56.When “2 Color and Position” is selectedThe colors and positions are set as follows:1 Blue (Factory preset)2 Violet3 Green4 Blue5 Violet6 GreenSelecting On-Screen Display menulanguageThe screen illustrated in step 1 is displayed. Select “0” with theSELECT ( , ) button and press ENTER to return to the initialsettings screen.Also refer to “Common procedures” on page 56.For your reference:• When is selected, “Play”, “Still” and other displaysas well as GUI screens will be displayed at a little lower positionthan the factory setting. It is recommended to choose thissetting if the screen is only partially displayed.Initial settingsSelecting On-Screen Display MessagesAt the initial settings screen (on page 56)Press SELECT ( , ) to select “4 On-Screen Messages” and press ENTER.1You can select whether “Play”, “Still” and other displays will bedisplayed or not, and the color and position of “Play”, “Still” andother displays as well as GUI screens.On-Screen Messages1 On-Screen Messages On2 Colour and Position Blue0 Exit2 Press SELECT ( , ) to Select the languageand press ENTER.1 English:English is selected. (Factory preset)2 Français / 3, Español :The language is selected.Setting is finished and the initial settings screen is displayed.2 Press SELECT ( , ) to select the settingand press ENTER.When “1 On-Screen Messages” is selected1 On: “Play”, “Still” and other displays will always appearon the TV screen. (Factory preset)2 Off: “Play”, “Still” and other displays will not appear onthe TV screen.