35Automatically changing screen size for VIDEO INPUT modesIf the received signal contains screen size specifications in VIDEO INPUT the screen size isautomatically changed.Notes:• IMAGE ADJ. settings are stored for TV, VIDEO and DVD each.• This setting will not change during ZOOM.Press to exit menu.TVMENUNote:When ID-1 is detected and screen size is changed, FULL will be display.1 2IMAGE ADJ.MENUADJUST SET UPPROGRAM CHDVD SET UPLOCKCLOSED CAPTIONINPUT LABELOTHER ADJUST1 Press the MENU button to display the MENU screen and select SETUP.MENUADJUST SET UPPROGRAM CHDVD SET UPLOCKCLOSED CAPTIONINPUT LABELOTHER ADJUST1 Press the MENU button to display the MENU screen and select SETUP.Press to select OTHER ADJUST.Press to display the OTHER ADJUST screen.ENTERPress to select IMAGE ADJ.Press to select 2ENTERPress to select OTHER ADJUST.Press to display theOTHER ADJUST screen.ENTER2Press to end.TVMENUON : When screen size specification signals aredetected, screen size is automatically changed.OFF : The screen size is not automatically changed. (TurnOFF if this function does not operate properly.)Press to select ID-1 (Image Detection).Press to set.ENTEROTHER ADJUSTOFF ONOFF ONOFF ONOFF ONOFF ONNATURL CLRVIDEO NR3D Y/CID-1IMAGE ADJ.CHILD LOCK1 2ID-1 OFF ON2When the top and bottom of the screen noise (IMAGE ADJ.)OTHER ADJUSTOFF ONOFF ONOFF ONOFF ONOFF ONNATURL CLRVIDEO NR3D Y/CID-1IMAGE ADJ.CHILD LOCK1 2(Example) 1 (Example) 2