Panasonic Switch-S24GPWR Installation Manual

Also see for PN25249-ID: Operation manual

Contents

Panasonic Switch-S24GPWR Installation Manual Manual pdf 9 page image

1.3 Accessories9 Installation Guide (this document) 1 CD-ROM (PDF version of Operating Instructions) 1 Rubber foot 4 Mount brackets (for mounting on a 19-inch rack) 2 Screws (for mounting on a 19-inch rack) 4 Screws (for connecting the mount brackets to the Switching Hub) 8 Power cord 1* Just the PN25249-TH has 1 Installation Guide in Thai (a total of 2 guides).Please be sure to confirm the content.Please contact our distributor if any of the contents are insufficient.1.4 Basic operationThis Product does not have a power ON/OFF switch. Connect the supplied powercord to this Switching Hub and connect the other end into an electric outlet.This Switching Hub operates at AC 100 - 240 V (50/60 Hz).When power is supplied, all the LEDs are turned ON.Then, POWER LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode)lights in orange, and self-diagnosis of hardware is executed.On completion of self-diagnosis, POWER LED (Power), STATUS/ECO LED(Status/ECO mode) and the Switching Hub starts operation as a Switching Hub.As this Switching Hub succeeds in communicating with a terminal connected to eachport, LED of the port lights up.When the terminal is not operating normally, for example when power is notsupplied to the terminal, LED is not lighted.QuantityFor configuration and management method, please see the PDF versionOperating Instructions in CD-ROM.(*)[Power Cord]The following power cords are supplied as per the intended nation of delivery.LocaleThailand 250 VAC 6 A TIS166-2549-Indonesia 250 VAC 10 A250 VAC 10 A250 VAC 5 ACEE7/7BS1363BS1363-13 A5 AMalaysiaSingaporeProduct NumberPN25249-THPN25249-IDPN25249-MYPN25249-SGPower Cord Rating FUSE Rated Current Plug Type