Panasonic Switch-S24GPWR Installation Manual

Also see for PN25249-ID: Operation manual

Contents

Panasonic Switch-S24GPWR Installation Manual Manual pdf 6 page image

Basic Instructions for the Use of This Product For inspection and/or repair, consult the retailer. Use commercial power supply from a wall socket, which is close and easily accessible to thisSwitching Hub. Unplug the power cord when installing or moving this Switching Hub. Unplug the power cord when cleaning this Switching Hub. Use this Switching Hub within the specifications. Deviation could lead to malfunction. Do not touch the metal terminal of the RJ45 connector, the modular plug of connectedtwisted pair cable. Do not place charged objects in the proximity of them. Static electricitycould lead to equipment failure. Do not put the modular plug of the connected twisted pair cable on objects that can carrystatic charge, such as carpet. Do not place it in the proximity. Static electricity could lead toequipment failure. Do not put a strong shock, including dropping, to this Switching Hub. Deviation could lead toequipment failure. Before connecting a console cable to the console port, discharge static electricity, for exampleby touching metal appliance (do not discharge by touching this Switching Hub). Do not store and/or use this Switching Hub in the environment with the characteristics listedbelow.(Store and/or use this Switching Hub in the environment in accordance with thespecification.)- High humidity. Possible spilled liquid (water).- Dusty. Possible static charge (such as carpet).- Under direct sunlight.- Possible condensation. High/low temperature exceeding the specifications environment.- Strong vibration and/or strong shock. Please use this Switching Hub in locations where the ambient temperature ranges from 0 to45°C.Failure to meet the above conditions may result in fire, electric shock, breakdown, and/ormalfunction. Please take notice because such cases are not covered by the guarantee.Additionally, do not cover the bent hole of this Switching Hub.Deviation could lead to high internal temperature and/or malfunction.* The use of this Switching Hub outside the operating ambient temperature range causes theprotective device to trip, stopping the PoE power supply. When using two Switching Hubs, do not stack them. When you place them side by side, allowfor a space of 20 mm or more between them. When stacking Switching Hubs, leave a minimum of 20 mm space between them.1. Please note that Panasonic shall not bear any liability whatsoever for any damages(this shall include lost earnings, lost opportunities, etc. but this is not restricted to thesethings) which were generated in relation to damages caused by operations and usage,or the inability to use this Switching Hub, whereby the customer does not followthis Installation Guide.2. The contents described in this document may be changed without prior notice.3. For any question, please contact the retailer where you purchased the product.6