Panasonic Switch-S24GPWR Installation Manual

Also see for PN25249-ID: Operation manual

Contents

Panasonic Switch-S24GPWR Installation Manual Manual pdf 16 page image

163.2 Configuration of IP address (Basic)(1) Connect this Switching Hub and PC with a RJ45–DSub 9-pin console cable andstart up the terminal emulator (ZEQUO assist Plus, etc.).(2) Pressing Enter key 3 times opens Login screen. Enter Login name and Password(the default is "manager" for both). (Screen 1)(3) Main Menu is displayed. (Screen 2)Press "B" to select [B]asic Switch Configuration. The next hierarchical menu isdisplayed. (Screen 3)(4) Press "I" to select System [I]P Configuration. The screen to enter some addressesis displayed. (Screen 4)(5) Press "I" to set an IP Address, press "M" to set a Subnet Mask, or press "G" to seta Default Gateway. Then enter the specified address. (Screen 4)(6) After completing the settings, select [Q]uit to previous menu twice to return toMain Menu (Screen 2). Here, select Save Configuration to [F]lash (Screen 5)and the command prompt changes to "Save current configuration? (Y/N)." Press"Y" to save the settings.(7) From terminals connected to network, confirm that the settings are reflectedcorrectly by executing PING test for entered address.Installation and Configuration33.1 Mounting to rackTake out the supplied 2 mountingbrackets (for 19-inch rack) and 8screws (for fixing the main unit andthe mounting bracket), and fix thebrackets to the main unit bytightening screws into 4 holes locatedat the sides. Then, mount thisSwitching Hub firmly to the rackusing the supplied 4 screws (for19-inch rack) or screws furnished atthe rack.

/ 19

Related manuals for Panasonic PN25249-ID