Panasonic SC-AK330 Operating Instructions Manual

Also see for SA-AK230: Operating instructions Service manual Service manual Service manual

Contents

Panasonic SC-AK330 Operating Instructions Manual Manual pdf 8 page image

RQT77908DiscsRepeat play CD MP3Remote control onlyPress [REPEAT] during play.“ ” is displayed.To cancel repeat playPress [REPEAT] to clear “ ” .NoteYou can use repeat mode with program play (A see left) and PlayMode (A page 7) functions.Marking a track CD MP3You can mark one track each on the discs loaded so that you canstart play from them later.Remote control onlyTo mark a track1 During play or stopSelect your desired track.(A page 6, “Basic play – Skip/Search”).2 Hold down [MARKER] until “STORING” blinks on thedisplay.The selected track is stored in the marker of the current disc.NoteIf a track is already stored in the marker, it will be replaced next timeyou store a new track in the same marker.To recall a marked track number in the current discDuring play or stopPress [MARKER] to recall a marker.Play starts from the track recalled.Note• “NO MARKER” indicates that the marker in the current disc is empty.• The marker memory is cleared when you open the disc tray.• You cannot use this function during program play or random play.Program play CD MP3You can program up to 24 tracks.Remote control onlyCDPreparation: Press [:::::/JJJJJ, CD] and then [L, CLEAR].1 Press [PROGRAM].“PGM” appears.2 Press [DISC] and then [1]–[5] to select the disc.3 Select the tracks with the numbered buttons.To select a 2-digit track, press [>10] once then the two digits.Repeat steps 2 and 3 to program other tracks.4 Press [:/J, CD] to start play.MP3Preparation:1. Press [DISC] and then [1]–[5] to select the disc.2. Press [L, CLEAR].1 Press [PROGRAM].“PGM” appears.2 Press [ALBUM ( or )] to select the album.To select an album directly, press the numbered buttonsafter pressing [ALBUM ( or )].To select a 2-digit album, press [>10] once then the two digits.To select a 3-digit album, press [>10] twice then the three digits.3 Press [g, REW/3] or [f, 4/FF] to select the track.To select a track directly, press the numbered buttons afterpressing [ g, REW/3] or [f, 4/FF].To select a 2-digit track, press [>10] once then the two digits.To select a 3-digit track, press [>10] twice then the three digits.4 Press [ENTER].Repeat steps 2 ~ 4 to program other tracks.5 Press [:/J, CD] to start play.To exit program modePress [PROGRAM] in the stop mode. (You can replay your programby pressing [PROGRAM] then [:/J, CD].)You can do the following while “P” is displayedAK330AK230• To check program contentsPress [g, REW/3] or [f, 4/FF].Every time you press the button:CD The track number and program order are displayed:AK330AK230MP3 Program order is displayed, then album number and tracknumber.• To add to the programCD Do steps 2 and 3.MP3 Do steps 2 ~ 4.• To clear the last trackPress [DEL].• To clear all tracksPress [L, CLEAR].While “CLEAR ALL” is blinking, press the button again to clear all tracks.Note• You cannot program CD-DA together with MP3 tracks.• MP3 The program memory is cleared when you change a disc oropen the disc tray.• MP3 You cannot program more than one disc for MP3.H.BASSH.BASS:/J, CDENTERNumberedbuttonsL, CLEARALBUM ( or )TITLE SEARCHCURSOR ( or ),g, REW/3,f, 4/FFINTROMARKERDELDISCPROGRAMREPEATTrack number Program order