Panasonic SC-AK330 Operating Instructions Manual

Also see for SA-AK230: Operating instructions Service manual Service manual Service manual

Contents

Panasonic SC-AK330 Operating Instructions Manual Manual pdf 3 page image

RQT77903Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructionslisted below. Keep these operating instructions handy for future reference.1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance withthe manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers) thatproduce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider thanthe other. A grounding-type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are providedfor your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, ortable specified by the manufacturer, or sold withthe apparatus. When a cart is used, use cautionwhen moving the cart/apparatus combination toavoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unusedfor long periods of time.14) Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatushas been exposed to rain or moisture, does not operate normally,or has been dropped.IMPORTANT SAFETY INSTRUCTIONSPlease check and identify the supplied accessories.Use numbers indicated in parentheses when askingfor replacement parts. (As of October 2004)(Only for U.S.A.)To order accessories, refer to “AccessoryPurchases” on the back cover.AC power supply cord .. 1 pc.(K2CB2CB00018)FM indoor antenna .. 1pc.(RSA0006-L)Supplied accessoriesAM loop antenna .. 1 pc.(N1DAAAA00001)Batteries forremote control .... 2 pcs.BatteriesThe remote controlUse• Insert so the poles (+ and –) match those in the remote control.• Do not use rechargeable type batteries.Do not:• mix old and new batteries.• use different types at the same time.• heat or expose to flame.• take apart or short-circuit.• attempt to recharge alkaline or manganese batteries.• use batteries if the covering has been peeled off.• keep together with metallic objects such as necklaces.Mishandling of batteries can cause electrolyte leakage which candamage items the fluid contacts and may cause a fire.If electrolyte leaks from the batteries, consult your dealer.Wash thoroughly with water if electrolyte comes in contact with anypart of your body.Remove if the remote control is not going to be used for a longperiod of time. Store in a cool, dark place.Replace if the unit does not respond to the remote control evenwhen held close to the front panel.Aim at the sensor, avoiding obstacles, at a maximum range of 7meters directly in front of the unit.• Keep the transmission window and the unit’s sensor free from dust.• Operation can be affected by strong light sources, such as directsunlight, and the glass doors on cabinets.Do not:• put heavy objects on the remote control.• take the remote control apart.• spill liquids onto the remote control.Remote controltransmitter ..................... 1 pc.AK330• Black: (N2QAHB000050)For U.S.A. only• Silver: (N2QAHB000051)AK230• Black: (N2QAHB000045)For U.S.A. only• Silver: (EUR7710020)R6/LR6, AA, UM-330˚30˚Transmissionwindow About 7 meters in front ofthe signal sensorRemote controlsignal sensor