72Fax Parameter TableNo. Parameter SettingNumber Setting Comments001 CONTRAST *1 Normal Setting the home position of the CONTRAST key.2 Lighter3 Darker002 RESOLUTION 1 Standard Setting the home position of the RESOLUTION key.*2 Fine3 400 dpi004 STAMP *1 Off Setting the home position of the STAMP key.To select the stamp function when document is stored in memory,see Fax Parameter No. 028.2 On005 MEMORY 1 Off Setting the home position of the MEMORY key.*2 On006 DIALING METHOD 1 Pulse Selecting the dialing method.*2 Tone007 HEADER PRINT *1 Inside Selecting the printing position of the header.Inside : Inside TX copy area.Outside : Outside TX copy area.No print : Header is not printed.2 Outside3 No print008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.2 From To009 RCV’D TIME PRINT *1 Invalid Selecting whether the machine prints the received date & time,remote ID, percentage of reduction and page number on thebottom of each received page.2 Valid010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.*2 Soft3 Loud012 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM. JournalOff/Always/INC.Off : Does not print.Always : Always prints.Inc. only : Prints only when communication has failed.2 Always*3 Inc. only013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal automaticallyafter every 100 transactions.*2 Valid014 FILE ACCEPTANCEREPORT*1 Invalid Selecting whether the machine prints the file acceptance journal.If you set this parameter to valid, a journal will print after anymemory communication.2 Valid017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.*2 AutoCustomizing Your Machine
