175Explanation of contents(1) Indication of communication mode(2) Start time of communication(3) End time of communication(4) File number : 001 to 999 (When the communication is stored into memory, a file number isassigned for each communication.)(5) Station number : Sequential number of the Stations.(6) Communication result : "OK" indicates that the communication was successful."BUSY" indicates that the communication has failed because of busy line."STOP" indicates that STOP was pressed during communication."P-OK" indicates that memory overflow occurred while storing the documentsinto memory for transmission but successfully stored document(s) was sent."R-OK" indicates that the Relayed XMT was successful."- -" indicates LAN transmission."3-digit Info Code" (see page 185) indicates that the communication has failed.In this case, the machine will print out the attached report with first page of yourdocument as shown on the previous page.(7) One-Touch/Abbreviated numberor % mark: % mark indicates dialed by direct number dial.(8) Recorded name in One-Touch,ABBR, direct dialing number, oremail address(9) Number of pages transmitted orreceived: The 3-digit number is the number of pages successfully transmitted or received.When the documents are stored into memory, two 3-digit numbers will appear.The first 3-digit number represents the number of pages successfullytransmitted. The second 3-digit number represents the total number of pagesthat were attempted to be transmitted.(10) Duration of CommunicationJournals and Lists7
