14Pre Installation InformationSetup as POP3 ClientTo install the DX-1000 as POP3 Client, the following network parameters need to be programmed on yournetwork.• IP Address of the DNS Server (if not available, see Note)• IP Address of the DX-1000• Subnet Mask of the DX-1000• Name or IP Address of the Default SMTP mail server• IP Address of the Default Router• POP Server Name or IP Address• POP User Account Name• POP Password• Email Address of the DX-1000 (see Note)1. The email address format can be the same as your regular email address. If your email address ispopuser001@panasonic.com, the DX-1000’s email address can be DX1000@panasonic.com.2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP andPOP Server Names. If the DNS Server is not available, change the Fax Parameter No. 94 (DNS SERVER)to ”1:Invalid”. Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.Email transmission (from the DX-1000 to a PC)Panafax UF-770PanasonicLTRDX1000@fax01.panasonic.comSMTP01.panasonic.com(SMTP Mail Server)POP02.panasonic.com(POP Server)(Router)popuser001@panasonic.comSMTPPOP3Email reception (from a PC to the DX-1000)Panafax UF-770 PanasonicLTRDX1000@panasonic.comSMTP01.panasonic.com(SMTP Mail Server)POP02.panasonic.com(POP Server)(Router)popuser001@panasonic.comSMTPPOP301007000001Note:0100799000401007990003#@multitude
