141Relayed TransmissionSending Documents via Internet RelayOnce you have recorded all the necessary parameters in your machine, you can send a document to oneor multiple G3 fax machines automatically through the Internet Relay Station by using the proceduredescribed below. The Internet Relay Station must have all the necessary parameters setup. To a Location That Has a Pre-programmed Relay StationSet document(s) face down.Enter only the telephone number(s) of the End ReceivingStation(s) using any combination of the following methods.• One-Touch Dialling.• Abbreviated Dialling.• Manual Number Dialling (up to 50 stations), pressSET after each station is entered. (See Note)• Directory Search Dialling, press SET after eachstation is entered. (For details, see pages 80 to 83)Ex: 02STARTThe document(s) is stored into memory and your machinestarts to send the document(s) to the Relay email addressof the Relay Station with the telephone number for the EndReceiving Station.Ex: End Receiving Station:4681111234(Telephone number)[See Note]Relay Station :uk-rly@london.panasonic.co.ukAfter the Relay Station completes its transmission to theEnd Receiving Station(s), your machine receives a COMM.Journal from the Relay Station. This Journal confirmswhether the Internet Relayed Transmission wassuccessful.If the Relay Station requires a special access number to get an outside line, enter that access number firstthen press PAUSEto enter a pause (represented by a ”–”) before entering the full number.06004000001060040100030600405001506004020009060040600520600406005306004060054Note:06004070008ENTER STATION(S)THEN PRESS START 00%<02> STOCKHOLM4681111234* STORE * NO.002PAGES=01 05%* STORE * COMPLETEDTOTAL PAGES=05 25%ON LINE *MEM.XMT*uk–rly#4681111234@if123
