10Timer SettingIngeThis feature allows you to program aStanding Time after cooking is completedand to program the oven as a minute timerand/or to program a delay start.NOTES:1. If oven door is opened during Stand Time orKitchen Timer, the time on the screen willcontinue to count down.2. Stand Time and Delay time cannot be pro-grammed before any Auto Control Function.This is to prevent the starting temperature offood from rising before defrosting or cookingbegins. A change in starting temperaturecould cause inaccurate results.1.2.3.• Press.• Set desired amount oftime using number pads.(up to 99 minutes and99 seconds.)• Press.➤Time will count downwithout oven operating.To Use as a Kitchen Timer:Example: To count 5 minutesWhennot thpadsto cooPre1.3.2.Exam1.2.3.4.• Press once.5 times• Enter desired amount ofdelayed time usingnumber pads.(up to 99 minutes and99 seconds.)• Enter the desired cookingprogram (see page 9 fordirections)➤To Set Delay Start:Example: To start cooking 5 minutes later.(3 mins. at MEDIUM Power.)• Press.➤Delayed time will countdown. Then cooking willstart.1.2.3.4.• Press once.5 times• Enter the desired cookingprogram (see page 9 fordirections)➤PreTo Set Stand Time:Example: To stand for 5 mins. after cooking(3 mins. at MEDIUM Power)• Press.➤Cooking will start.After cooking, stand timewill count down withoutoven operating.• Set desired amount ofStand Time using num-ber pads. (up to 99 min-utes and 99 seconds.)To c