Panasonic NN-H264 Operating Instructions Manual

Contents

Panasonic NN-H264 Operating Instructions Manual Manual pdf 23 page image

21Timer FeatureExample: To count down 5 minutes.1. • Press Timer.2. • Set desired amount of time usingnumber pads.(up to 99 minutes and 99 seconds).3. • Press Start.➤Time will count down without ovenoperating.NOTE:1. When each stage finishes, a two-beep signal sounds. At theend of the program, the oven will beep five times.2. If the oven door is opened during Stand Time, Kitchen Timeror Delay Time, the time on the display will continue to countdown.3. Stand time and Delay start cannot be programmed beforeany automatic Function. This is to prevent the starting tem-perature of food from rising before defrosting or cookingbegins. A change in starting temperature could cause inac-curate results.This feature allows you to program the oven as a kitchen timer.It can also be used to program a standing time after cooking iscompleted and/or to program a delay start.To Use as a Kitchen Timer:CAUTION:If oven lamp is lit while using the timer feature, the oven isincorrectly programmed. Stop oven immediately andre-read instructions.To Set Delay Start:Example: To cook at P6 power for 3 minutes, with standtime of 5 minutes.1. • Enter the desired Power Level (seepage 12 for directions).2. Set desired cooking time using numberpads.3. • Press Timer.4. • Set desired amount of Stand Timeusing number pads. (up to 99 minutesand 99 seconds)5. • Press Start.➤Cooking will start. After cooking,stand time will count down withoutoven operating.To Set Stand Time:Example: To delay the start of cooking for 5 minutes, andcook at P6 power for 3 minutes.1. • Press Timer.2. • Enter desired amount of delay timeusing number pads. (up to 99 minutesand 99 seconds)3. • Enter the desired Power Level (seepage 12 for directions).4. Set desired cooking time using numberpads.5. • Press Start.➤Delay time will count down. Thencooking will start.Press 5 timesPress 5 times