Panasonic MCO-170AICL Operating Instructions Manual

26FOR BETTER CULTIVATIONPreventing contaminationTo prevent contamination of the chamber, select a suitable installation site. Avoid locations with high temperatures or humidity.Avoid locations with high temperatures or humidity, because of a greater presence of microorganisms inthe air. Avoid locations with passers-by or drafts.Avoid locations near doors, air conditioners, fans, etc., where passers-by or drafts can facilitate the entry ofmicroorganisms into the chamber. If possible, use a cleanroom.To achieve a better culture, it is recommended that a cleanroom be used if one is available. Use clean containers.The greatest cause of contamination is dirty containers for cultures. Be careful not to get containers ortrays dirty when taking them in and out. Keep the chamber clean.Wipe off any fingerprints. If water spills from the humidifying pan, or if the doors are left open for a longtime, condensation may form on the inside of the doors. If that occurs, wipe off the condensation with a drysterile gauze. In particular, clean and disinfect the chamber if the culture medium is spilled. For details,refer to “ROUTINE MAINTENANCE” on page 76. Use sterile distilled water in the humidifying pan.Always use sterile distilled water in the humidifying pan. Do not use ultrapure water, because it may causered rust-like particles in the humidifying pan. Clean the humidifying pan once a month. Keep the incubator out of direct airflows from air conditioners or fans.Cool airflow from an air conditioner may cause condensation and lead to possible contamination.

/ 89

This manual is suitable for:

MCO-170AICL MCO-170AICUVHL MCO-170AICUVL

Panasonic MCO-170AICL Operating Instructions Manual

Product

Learn More

Legal