Menu
Panasonic MCO-170AICL Operating Instructions Manual
                                                                                         |
18INSTALLATIONCAUTIONDo not climb on the incubator or place objects on top of it. Doing so may damage it or cause it to fallover, resulting in injury.●In case of double stackFor stacking the incubators surely, refer to theprocedure included with the optional doublestacking bracket MCO-170PS or the stacking plateMCO-170SB.Note: Two hooks are attached to the rear of theupper incubator. When stacking incubators, fix theupper incubator to the wall with these hooks andwire or chain (See the figure on the point).Note: When stacking the incubators on our CO2incubator or O2/CO 2 incubator other than thisproduct, use the stacking plate MCO-170SB. Referto table 11 on page 85. When the incubator is not in useEmpty the water from the humidifying pan and remove moisture from the chamber. Make sure that thechamber is completely dry before closing the doors. Failure to do so may result in damage. Before moving the incubatorBefore moving the incubator, empty the water from the humidifying pan, disconnect the power supply plugfrom the outlet, and make sure that the cord will not be damaged. Failure to do so may result in electricshock or fire.HooksWire |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved