3.1 Customising Your Phone (Personal Programming)170 User Manual3.1.2 Settings on the Programming ModeYou can programme features using the programming mode.– Setting Features– Clearing FeaturesSetting FeaturesThe default settings are shown in bold letters. For later reference, place a check mark in the boxes below toindicate your customised setting.NoticeThe default value may vary depending on country/area. For more details, consult your dealer.• To exit at any time, lift the handset.• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.Item ProgrammingInput Selection & ParameterYour extension informationPT: The display shows the PBX number, slot numberand port number.PS: The display shows the PS number.Preferred display contrast levelfrom the 4 levels available(Display Contrast Selection)*1LightLittle LightLittle DarkDarkFollowprogramminginput.To programmeTo exitTo enter the programming modeFollowSelection& Parameter.PressPROGRAMorPAUSE. PressPROGRAMorPAUSE.selection ¶meterprogramminginputORPROGRAMPAUSEORPROGRAMPAUSEPressENTERorSTORE.ORAUTO DIALSTOREPressENTERorSTORE.ORAUTO DIALSTORE0 0EXT1050:10308PBX no. Port no.Slot no.EXT3001:99001PS no.0 11234