1.7 Setting the Telephone According to Your Needs110 User Manual1.7.2 Refusing Incoming Calls (Do Not Disturb [DND])You may set this feature when you are in a meeting or busy.To set/cancel• When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing theFWD/DND button (fixed button) instead of " 710".• The FWD/DND button light shows the current status as follows:Off: Both features are not set.Red on: FWD modeFlashing red slowly: DND mode• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND SettingMode. Ask your manager what mode your system is in if you are not sure.(1) When in the FWD/DND Cycle Switch Mode:Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting asshown below:(2) When in the FWD/DND Setting Mode:Pressing the FWD/DND button (fixed button) while in idle status will take you directly tothe programming mode for the FWD/DND setting.(Refer to "3.1.2 Settings on the Programming Mode".)NoteA FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: themode cannot be changed.• If your extension has set this feature, a calling extension will hear DND tone.• If this feature is set, the Call Forwarding (FWD) feature does not work.• Specified extensions can override this feature and call DND extensions (DND Override).On-hook.Enter1 to setor0 to cancel.PT/SLT/PSSetCancel10OROff-hook. Enter71.120 Both CallsIntercom CallsOutside CallsOROR17Enter0 to2 as you desire.C.ToneFWD DND Off
