3.1 Customising Your Phone (Personal Programming)152 User Manual3.1.2 Settings on the Programming ModeYou can programme features using the programming mode.Setting FeaturesThe default settings are shown in bold letters. For later reference, place a check mark in the boxesbelow to indicate your customised setting.NoticeThe default value may vary depending on country/area. For more details, consult your dealer.— Setting Features— Clearing Features• To exit at any time, lift the handset.• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.Item ProgrammingInput Selection & ParameterYour extension informationPT: The display shows the PBX number, slot numberand port number.PS: The display shows the PS number.Preferred display contrastlevel from the 4 levelsavailable.(Display ContrastSelection)*1LightLittle LightLittle DarkDarkFollowprogramminginput.To programme To exitTo enter the programming modeFollow Selection& Parameter.Press PROGRAMor PAUSE.Press PROGRAMor PAUSE.selection ¶meterprogramminginputORPROGRAMPAUSEORPROGRAMPAUSEPress ENTERor STORE.ORAUTO DIALSTOREPress ENTERor STORE.ORAUTO DIALSTORE0 0EXT1050:10308PBX no. Port no.Slot no.EXT3001:99001PS no.0 11234