Panasonic KX-TDA0484 Getting Started

Also see for KX-TDA0480: Getting started guide Installation manual Getting started

Contents

Panasonic KX-TDA0484 Getting Started Manual pdf 40 page image

4.3 Programming the VoIP Gateway Card in the Chicago Office40 Getting Started4.3 Programming the VoIP Gateway Card in theChicago OfficeThis section details the procedure to program the VoIP Gateway Card in the Chicago office,which for the most part is a duplication of that for the Los Angeles office. For generalinformation that is not discussed here, refer to the relevant sections in "4.2 Programming theVoIP Gateway Card in the Los Angeles Office".There are differences in the procedure where distinct setting values are required forparameters that are dependent on the specific network configuration of the Chicago office.Also, the address translation table does not need to be programmed, because the onedownloaded from the card in the Los Angeles office already contains the information for theentire network. You can simply upload the address translation table from the Los Angelesoffice, and the cards can communicate with each other on the network.Starting the IP-GW4 Maintenance UtilityChanging the Status of the VoIP Gateway Card1. Start Internet Explorer from the Start menu.2. a. In the Address box of Internet Explorer,type http://192.168.1.200 (default IPaddress of the card).Make sure that the PC has theappropriate IP address setting to accessthe card (refer to "4.1.1 Preparing thePC").b. Press the ENTER key on the keyboard.3. a. In the Username box, typeAdministrator (default user name).b. In the Password box, typeAdministrator (default password).c. Click LOGIN.The main menu appears.1. Click 2.1 Change RUN/STOP status in themain menu.2. a. Click STOP for Status after changing.b. Click OK.c. Click OK.d. Click OK.